Circutor Compact DC 2, Инструкция по эксплуатации

Страница: 54 / 78

54
COMPACT DC
Instruction Manual

PrimaryDns:
primary DNS IP.

SecondaryDns:
secondary DNS IP.

IpLoc: IP address for local communications.

IpMaskLoc: Subnet mask for local communications.

PortWS: Receiver port for communications from the STG.

PortSSH:
Receiver port for communications from the SSH.

HttpPort:
Option to enable or disable the web server using HTTP. If the HTTP port is deactivated,
the web site may only be accessed through HTTPS.

FtpServer: FTP server.

FtpsServer: FTP server on TLS.

AccinacTimeout:
Duration of inactivity, in minutes, before a session is closed.

AccSimulMax:
Maximum number of sessions allowed simultaneously.

PrimeInyection:
Injection type of the PLC signal.
Note: Likewise, activating the FTP or FTPS server will enable access to the concentrator logs and the
last reports made by the concentrator through a programmed task if
TpStore
is activated (these are
located at “/media/mmcblk0p1/reports”).
The FTP or FTPS server can only be accessed by " admin " users.
5�14�3� SECONDARY CONFIGURATION
Figure 62:Secondary configuration�
In this section you can configure the following secondary setup parameters:

DoubleSecondary: Enable or disable a concentrator with two secondaries.

SecondaryMode: Operating mode of the secondary.

Slave1:
IP address of slave 1.

Slave2:
IP address of slave 2.

Slave3:
IP address of slave 3.
5�14�4� STG CONFIGURATION
Figure 63:STG configuration�