Circa Enterprises Guardian HDE Series Скачать руководство пользователя

Страница: 32 / 44

Setup & Configuration

HDE-VoIP Telephones

Page 32

Web Page Item

Description

Autoprovisioning

Disable Autoprovisioning:

When this option is enabled, the device will try to fetch an

autoprovisioning file from a remote server.

Autoprovisioning Server:

When this option is enabled, the device will fetch its

autoprovisioning file from the server specified from the DHCP

server.

Autoprovisioning Filename:

Enter the Autoprovision file name that was generated with the

Setup parameters.

Use tftp:

If using TFTP (instead of http) to download autoprovisioning files

click the box.

Username:

The username used to authenticate with an autoprovisioning

server. Leave this field blank to disable authentication.

Password:

The password used to authenticate with an autoprovisioning

server. Leave this field blank to disable authentication.

Autoprovisioning autoupdate (in

minutes):

The reoccurring time (in minutes), the device will wait before

checking for new autoprovisioning files. Enter up to 6 digits. A

value of 0 will disable this option.

Note

: To use the auto update options, enable the

Set Time with

NTP Server on boot

setting on the

Device Configuration Page

Autoprovision at time (HHMMSS):

The time of day the device will check for a new autoprovisioning

file. The time must be 6 characters in length and in HHMMSS

format. An empty value will disable this option.

Note

: To use the auto update options, enable the

Set Time with

NTP Server on boot

setting on the

Device Configuration Page

Autoprovision when idle (in minutes >

10):

The idle time (in minutes greater than 10) after which the device

will check for a new autoprovisioning file. Enter up to 6 digits. A

value of 0 will disable this option.

Note

: To use the auto update options, enable the

Set Time with

NTP Server on boot

setting on the

Device Configuration Page

Infinite Retries (Not Recommended)):

Selected will try to get the AutoProvisioning file from provisioning

server until the file is loaded.

Click the

Save

button to save your configuration settings.

Note

: You need to reboot for changes to take effect.

Click on the

Reboot

button to reboot the device.

Table 9 - Autoprovisioning Configuration Parameters

Содержание Guardian HDE Series













































Результаты поиска

Содержание Guardian HDE Series

Отзывы:

Похожие инструкции для Guardian HDE Series

Бренды по названию

Популярные бренды

Circa Enterprises Guardian HDE Series, Инструкция по настройке и конфигурации

Результаты поиска

Содержание Guardian HDE Series

Отзывы:

Похожие инструкции для Guardian HDE Series

Бренды по названию

Популярные бренды