background image

How to get started with your BT 1560 from Cypher Lab 

 
 
Your Scanner comes with two parts (a scanner and a cradle) and two cables to 
connect the cradle (a) to the computer and (b) to the power. 
 
To connect the power to the cradle 

1.

 

Turn the cradle over and look in the bottom of the cradle  

 
 
 

 

 

2.

 

Now connect the computer cable to your computer and turn the cradle on. 

 

3.

 

Your computer should automatically recognise that this device is connected. 
You should see a small message at the bottom of your screen saying “USB 
Human Interface Device Installed” 

 

4.

 

When using your barcode for the first time, remember – it is waking up – hold 
in the scanner trigger for 3 – 5 seconds until it beeps. Then wait for the 
scanner indicator light to show a red bar of light 

 

5.

 

Now, turn over the base unit, there are two small barcodes on the bottom of 
the unit 

 

Plug in the power 
cable here 

Plug the computer 
cable in here 

Here are the two barcodes you will 
need to scan to activate your

 

scanner.

 

Отзывы: