CipherLab 9500 Series, Справочное руководство

Страница: 33 / 153

23
Chapter 1 Using 9500 Mobile Computer
1.3.3 FUNCTION KEY
The [Func] (= Function) key serves as a modifier key, and the functionality of each key
combination is application-dependent.
1)
To enable this modifier key, press on the keypad. Its icon will appear on
the status bar.
2)
Now press another key to get the value of key combination (say, press [1] to get the
value of F1). The icon will go off now.
3)
To get the value of another key combination modified by the [Func] key, repeat the
above steps.
4)
To abort the key modification, press again, and the icon will go off.
Note: It is not necessary to hold down the [Func] key.
Below is a list of the factory setting for a variety of key combinations.
Key Combination Action
,
PgUp (red-coded): move text up one screenful
,
PgDn (red-coded): move text down one screenful
,
Home (red-coded): move to the beginning of screen or document
,
End (red-coded): move to the end of screen or document
,
Toggle ON/OFF the backlight of keypad only
,
Turn ON the backlight of LCD and decrease its luminosity
,
Turn ON the backlight of LCD and increase its luminosity
Note: Press the [Func] key first, and then press the second key for a specific function.
1.3.4 TASK KEY
By default, the [Task] key is undefined. It can be programmed as a shortcut key for a
specific program or action. Refer to Windows CE Products Programming Guide for the
supplied API – SetKeyPadBind().