Cineversum Black Wing MK 2015 R599850, Руководство пользователя

Страница: 24 / 44

R599850 - BW MK2015 User Manual
INSTALLATION
24
9.2 Projector 3D Settings
3D Formats
Use this function to choose the correct 3D input format. Some input signals may contain 3D data such as 1080p
Side-by-Side but encoded as if they were in 2D. This unit may treat them as standard 2D signals and will not
project correctly. In such cases, configure the signal manually between Side-by-Side, Top & Bottom and 2D. In
other cases, you may select Auto setting.
2D to 3D Conversion
You can use the 2D to 3D Conversion to convert 2D pictures into a quasi-3D picture. The quality of the result may
differ from quality of original 2D picture. Turn it On or Off.
Parallax
Use this function to adjust the amount of misalignment of the left and right 3D video images. Adjust settings
according to your preference between -15 and +15.
Parallax is an important parameter for 3D movies that directly affects comfort during 3D projection.
Because the parallax value changes with the screen size, it is important to set this parameter to a value
with which everyone feels comfortable with the 3D effect. In general, women and children will feel better
with a smaller parallax value. Do not hesitate to alter this settings if you feel eye-strains or headaches.
Due to the large screens used in home theaters compared to flat screen TVs, we recommend a negative value
of -6 for computer sources and video games in native 3D with large parallax. This setting is best at 0 for Blu-Ray
movies aimed for Digital-Cinema audience.
Crosstalk Cancel
Can be adjust with a 3D signal input but not when 2D to 3D Conversion is On. This function is to lessen the
residual cross-talk found between 3D video images. Adjust the Parallax value and then the Cross-talk settings in
order to cancel the residual cross-talk without loosing picture quality.
Adjustments White, Red, Green and Blue: -8 +8
Negative values reduce visible Crosstalk, positive values bring a brighter 3D picture at the cost of more
Crosstalk.
10.0 INSTALLATION
10.1 Lens Control
Focus
Adjust the lens focus to obtain a clear picture.
Zoom
Adjust the lens zoom to fill the screen with the picture.
Shift
Adjust lens shift to center the picture into the screen.
Image Pattern
If set to On, an internal pattern will be generated to adjust the current setting. If you want to use an external
generator, turn this option to Off.
Lock
Once the Lens is correctly set, you may lock this setting menu by turning the Lens control Lock to On. Any attempt
to access the Lens control menu will lead to the display of a warning message.
Lens Memory Select
Call up saved lens adjustment data to configure the lens to the save settings.