Cineversum Black Wing MK 2015 R599850, Руководство пользователя

Страница: 20 / 44

R599850 - BW MK2015 User Manual
PICTURE ADjUST
20
All Clear: To delete all characters. OK: To save the current name, a save confirmation will appear.
7.3 Advanced Color Profile
Expert Calibration is accessed only by using a programmable IR-RCU, RS-232C or LAN control. Two additional
sets of Picture Modes can be activated. Each set designated as THX and ISF profiles have to be calibrated. Once
done, these profiles are stored and displayed in the picture mode menu list but will not be modifiable. Additionally
the Calibrator can certify his action by setting in the Information Menu his name or company name.
Color Management (TSL adjustments)
The Color Management gives the installer an unique calibration ease with the integrated Color Adjustment menu:
each primary, secondary colors and orange can be independently calibrated to obtain a precise color balance in
a snap. Adjust the Red, Green, Blue, Yellow, Cyan, Magenta and Orange Tints, their saturations and luminances
and store them into Custom profiles.
7.4 Color Temperature
Color temperature stands for the spectral properties of a light source. Low color temperature implies warmer
ambiance (more yellow/red) while high color temperature implies a colder light (more blue). Depending on the
Picture Profile selected, this setting can be set to:
• Preset: from 5500K / warm colors, up to 9500K / cold colors in steps of 500K.
• Xenon1(*) uses the Xenon filter and color compensation to reproduce a film projector
• Xenon2(*) uses the Xenon filter and color compensation to reproduce a digital cinema projector
• Xenon3(*) same as Xenon2, but within a cooler temperature.
• High Bright used for maximum brightness output available.
• Custom1, Custom2 and Custom3 can be used to adjust color temperature to specific environment.
A Custom setting allows a fine adjustment of a Color Temperature by selecting it in the Correction Value menu.
Adjust the Gain values (bright part) and Offset values (dark part) for each color Red, Green and Blue.
Accurate color temperature may require professional tools such as dedicated software and colormeter.
Wait at least 15 minutes after startup before modifying the picture settings.
(*) Xenon Modes are exclusive to BW 2&3 models.
7.5 Advanced Color Temperature
When selecting a Color temperature, you can set the Gains and Offsets of each primary color: red, green and
blue to finely adjust the color balance.
7.6 Gamma
Gamma is the relationship between the color values of the data and the color values displayed. The Gamma
coefficient makes it possible to adjust the brightness of the midtones only without affecting the very bright and
very dark areas. If gamma is set too high, middle tones appear too dark. If it’s set too low, middle tones appear
too light.
Depending on the current active Picture mode, the Gamma setting can be set to:
• Normal: Standard setting for normal viewing.
• Brightness Priority: Places more emphasis on the brightness than the Normal setting.
• Contrast Priority: Places more emphasis on the contrast than the Normal setting.
• Gradation Priority: Places more emphasis on the gradation than the Normal setting.
• Custom1 to Custom3: fine tune the gamma setting according to the user’s preference.
• NB: when Color Profile is set to x.v.Color, gamma setting is fixed to Normal.
Additional Gamma settings when Film Color Profile is selected (BW 2&3):
• Film1: standard gamma
• Film2: slightly more contrasted gamma