EN
EN - 3
For your safety, we recommend the use of PPE (Personal
Protective Equipment)
1. RECEIPT
The installation and maintenance operations must be performed by qualified and experienced personnel.
This appliance is not designed to be used by persons (including children) with limited physical, sensory or mental
capabilities, or by persons with insufficient experience or knowledge, unless they are being supervised by a person
responsible for their safety or have received instructions on the use of the appliance from such a person.
Children should be supervised to ensure that they do not play with the unit.
Follow the operating precautions to the letter when working on the unit. Labels have been placed on the unit to
remind you of the safety instructions.
As a general rule, follow all applicable safety regulations and standards. Damage to the dual flow air handling unit
will be disregarded in the event of failure to follow the instructions in this document.
Each unit has a name plate bearing an identification number. This number must be quoted in all correspondence.
In accordance with Article 133-3 of the French Code of Commerce, the recipient is entirely responsible for checking the condition
of the goods received. In the event of missing items, the customer must provide the exact number of parcels delivered. Any
damaged or missing items must be specified on the delivery note in the presence of the driver before signing the delivery note.
This information must be confirmed to the Carrier by registered letter within three business days. The comments "conditional"
and "pending unwrapping" shall have no value. The client must unwrap the goods in the presence of the driver. Claims must be
made at the time of delivery and be described in detail.
The unit must be stored in its packaging and sheltered from weather.
The machines are supplied as a single unit.
2. HANDLING
The unit can be handled by slings, lifting beam or stacker. In all cases, the lifting point has to be at the base of the unit. The centre
of gravity is at the centre of the unit.
This operation will be performed by qualified personnel.
The unit must be handled with care, and only in the horizontal
position. If the unit is handled by a lifting beam + slings, tubes
need to be placed in the holes provided in the support feet.
Ensure that the crane hook adapter is large enough to
prevent the belts applying any pressure to the AHU casing.
Furthermore, ensure that the steel tubes are secured to
prevent any movement.
COLIS
PACKAGE
If the above-mentioned lifting methods cannot be used, the unit
may be lifted using a forklift truck, taking great care not to dent
the lower panel (use forks of a sufficient length).
Follow the applicable handling rules.
The units must be set down directly on flat, level ground. The flatness value must be the best possible, around one per thousand.
Under normal conditions of use, there is no need to fix the unit to the floor, unless it is being installed outside of the building.
The unit's support feet must be standing fully on their contact surface. It is important to allow sufficient service space to facilitate
maintenance operations.
