Chyron infinit! series, Руководство по эксплуатации

Страница: 787 / 978

iNFiNiT! Family Operation Manual
Revision D 19-17 Disk Utilities
/LVWLQJ)LOHVWR&RS\
To produce a list of directories on the current disk:
[ ] 1. Enter a source drive and directory in the
FROM:
field. For example, to copy a file from
the hard disk’s iNFiNiT! directory, enter C/
INFINIT
.
• If the drive and/or directory you specified
in the
FROM: field is invalid, a prompt is
displayed. Re-enter, or press
ESC
to abort
the operation.
• To abort the Copy, press
CNTL Q
or select
Quit .
[ ] 2. Enter a target drive and directory in the
TO:
field. For example, to copy to the keyboard
floppy iNFiNiT! directory, enter
A/INFINIT
.
• If the target directory you specify doesn't
exist, it is automatically created.
You can-
not copy anything from the SYSTEM
directory into any other type of direc-
tory except SYSTEM.
[ ] 3. Press CNTL L or select List to produce a list.
Use the cursor keys to move through the list once it has
been generated.
0XOWL)LOH&RS\
At this point, you can copy everything in the source
directory to the target directory:
• Press
CNTL X
or select
Execute
.
COPY NAMES: *
specifies that everything in the directory will be copied.
The general procedure for multi-file copying is as follows:
[ ] 1. For each file you want to copy: Use the cursor
keys to highlight the file, then press
. An