Chyron infinit! series, Руководство по эксплуатации

Страница: 458 / 978

CHYRON Corporation
Clock & Timer Displays 11-4 Revision D
For Timer modes, the following formats can be specified
to count up/down to/from
999
minutes or seconds:
TIME ZONE OFFSET
A time zone offset can be entered to adjust for time zone
differences in either direction. To set an offset:
• When typing in the
Format
, add
+
or
-
, then the
number of hours to be offset.
For example, if the format is
HH:MM:SS
, enter
HH:SS:MM+3 to display New York time while in Los
Angeles.
CHARACTER ALIGNMENT
You can set all Clock/Timer characters into a fixed width
format (no kerning) to avoid a jumpy appearance as the
Clock/Timer runs. To enable or disable this feature:
• Press F after exiting the Format: field.
/HDGLQJ=HURV7LPHUV2QO\
Leading Zeros in Timers can be set to display or not dis-
play zeros in the empty placeholders.
• Highlight the Leading Zeros: field, then press the
SPACE BAR
or click on the field to choose either
Blanked or Displayed ; or, press B to select
Blanked
, or
D
to select
Displayed
. Press or move
the cursor out of the field.
For example, a time of 1 minute, 3 seconds, 84 hundredths
of a second, if set to
Blanked , appears as 1:03.8 when
using an
MM:SS.T
format.timer. If set to
Displayed
, he
same time, using the same format, appears as 01:03.8 .
MMM:SS MMM M:SS SSS.T SSS
MM M:SS.T SSS.TH MMM:SS.TH M.SS.TH