Chyron infinit! series, Руководство по эксплуатации

Страница: 415 / 978

iNFiNiT! Family Operation Manual
Revision D 9-73 Advanced Playback
([HFXWLQJD)DGH
There are three ways to execute Fade. All numerical data
is entered using the Address Keypad.
To fade in a message:
[ ] 1. Select
In
in the
Fade
field, and set the
Percent
slider to 0 (§9.6.1.2).
[ ] 2. Enter the message ID number, then press
READ
.
[ ] 3. Press
X or select Execute
to fade in the
message.
[ ] 4. If you like, press X or select Execute again to
fade it out.
To fade out the message that is on the screen:
[ ] 1. Select
Out
in the
Fade
field, and set the
Percent slider to 100 (§9.6.1.2).
[ ] 2. Enter the message ID number, then press
READ
to display the message.
[ ] 3. Press
X or select Execute
to fade out the
message.
[ ] 4. If you like, press X or select Execute again to
fade it in.
To fade in and out a sequence of messages:
[ ] 1. Select
Out/In
in the
Fade
field, and set the
Percent slider to 100 (§9.6.1.2).
[ ] 2. Enter the message ID number of the first
message to fade in, then press
READ NEXT
.
This loads the message into the READ NEXT
buffer (§8.4.9).