- Press it to save and exit setting after setting the last item.
- In normal mode, press it to display the alarm time for 5 seconds.
15.
[ °C/°F ]
key:
- Press it to select temperature unit between Celsius and Fahrenheit.
(for DCF / MSF / WWVB version only)
16.
[ DOWN ]
key:
- In setting mode, press it to adjust the value of flashing digit downwards.
And press it without releasing to speed up adjusting.
17.
[ UP ]
key:
- In setting mode, press it to adjust the value of flashing digit upwards.
And press it without releasing to speed up adjusting.
18.
[ RESET ]
key:
- In case of mal-function, press it to reset all the values.
19.
[ ROTATE ]
key:
- Press it to rotate the angle of the projection.
20.
[ BACKLIGHT ON/OFF ]
slide switch:
When the clock is powered by batteries:
Slide to either
<ON>
or
<OFF>
position:
- Press
[ SNOOZE/LIGHT ]
key to turn on backlight for 5 seconds.
When the clock is powered by DC adaptor:
Slide to
<ON>
position:
- Backlight will be on all the time.
Slide to
<OFF>
position:
- Backlight will be off. Press
[ SNOOZE/LIGHT ]
key to turn on backlight
for 5 seconds.
21.
[ L/H ]
slide switch
Set backlight brightness.
- Slide to
<L>
position for dimmer backlight.
- Slide to
<H>
position for brighter backlight.
22.
[ PROJECTION ON/OFF ]
slide switch:
When the clock is powered by batteries:
Slide to either
<ON>
or
<OFF>
position:
- Press
[ SNOOZE/LIGHT ]
key to turn on backlight and projection for 5
seconds. Press and hold
[ SNOOZE/LIGHT ]
key for 5 seconds to turn
on backlight for 5 seconds and projection for 30 minutes.
When the clock is powered by DC adaptor:
Slide to
<ON>
position:
- Projection will be on all the time.
Slide to
<OFF>
position:
- Projection will be off. Press
[ SNOOZE/LIGHT ]
key to turn on backlight
and projection for 5 seconds. Press and hold
[ SNOOZE/LIGHT ]
key for 4
seconds to turn on backlight for 5 seconds and projection for 30 minutes.
23.
[ RCC ]
key:
It is effective only in time mode.
- In normal mode, press it to manually turn on or turn off the RC reception.
- During the RC reception, press and hold it for 8 seconds to turn off the
RC auto reception function. Press and hold it for 8 seconds again to turn
on RC auto reception function.
- During the RC reception, press and hold it for 3 seconds to change the
signal frequency between 40k and 60k. (JJY version only)
24.
FOCUS
knob
- Adjust the quality of the projected data.
25. DC jack
26. Battery compartment
27. Telescopic aerial
4. GETTING STARTED
● If using batteries to power the unit, remove the battery door at the back
of the unit.
● Insert 3 AA size batteries into the battery compartment. Ensure all the
