Chrysler Pacifica 2021 Скачать руководство пользователя

Страница: 302 / 432

300

SAFETY

Event Data Recorder (EDR)

This vehicle is equipped with an event data

recorder (EDR). The main purpose of an EDR is

to record, in certain crash or near crash-like

situations, such as an air bag deployment or

hitting a road obstacle, data that will assist in

understanding how a vehicle’s systems

performed. The EDR is designed to record data

related to vehicle dynamics and safety systems

for a short period of time, typically 30 seconds

or less. The EDR in this vehicle is designed to

record such data as:



How various systems in your vehicle were

operating;



Whether or not the driver and passenger

safety belts were buckled/fastened;



How far (if at all) the driver was depressing

the accelerator and/or brake pedal; and,



How fast the vehicle was traveling.

These data can help provide a better

understanding of the circumstances in which

crashes and injuries occur.

NOTE:

EDR data are recorded by your vehicle only if a

non-trivial crash situation occurs; no data are

recorded by the EDR under normal driving

conditions and no personal data (e.g., name,

gender, age, and crash location) are recorded.

However, other parties, such as law enforce

ment, could combine the EDR data with the type

of personally identifying data routinely acquired

during a crash investigation.

To read data recorded by an EDR, special

equipment is required, and access to the

vehicle or the EDR is needed. In addition to the

vehicle manufacturer, other parties, such as

law enforcement, that have the special

equipment, can read the information if they

have access to the vehicle or the EDR.

HILD

ESTRAINTS

Everyone in your vehicle needs to be buckled up

at all times, including babies and children. Every

state in the United States, and every Canadian

province, requires that small children ride in

proper restraint systems. This is the law, and

you can be prosecuted for ignoring it.
Children 12 years or younger should ride

properly buckled up in a rear seat, if available.

According to crash statistics, children are safer

when properly restrained in the rear seats

rather than in the front.

WARNING!

In a collision, an unrestrained child can

become a projectile inside the vehicle. The

force required to hold even an infant on your

lap could become so great that you could not

hold the child, no matter how strong you are.

The child and others could be badly injured or

killed. Any child riding in your vehicle should

be in a proper restraint for the child’s size.

21_RUP_OM_EN_USC_t.book Page 300

Содержание Pacifica 2021

















































































































































































































































































































































































































































Результаты поиска

Содержание Pacifica 2021

Отзывы:

Похожие инструкции для Pacifica 2021

Бренды по названию

Популярные бренды

Chrysler Pacifica 2021, Руководство пользователя

Результаты поиска

Содержание Pacifica 2021

Отзывы:

Похожие инструкции для Pacifica 2021

Бренды по названию

Популярные бренды