Chrysler ASPEN, Руководство пользователя

Страница: 245 / 481

Controlling The iPod
T
Using Radio Buttons
To get into the UCI (iPod
t
) mode and access a connected
iPod
t
, press the ‘AUX’ button on the radio faceplate. Once
in the UCI (iPod
t
) mode, iPod
t
audio tracks (if available
from iPod
t
) start playing over the vehicle’s audio system.
Play Mode
When switched to UCI mode, the iPod
t
automatically
starts Play mode. In Play mode, you may use the
following buttons on the radio faceplate to control the
iPod
t
and display data:
•
Use the TUNE control knob to select the next or
previous track.
•
Turning it clockwise (forward) by one click, while
playing a track, skips to the next track.
•
Turning it counterclockwise (backward) by one
click, during the first two seconds of the track, will
jump to the previous track in the list. Turning this
button at any other time in the track, will jump to
the beginning of the current track.
•
Jump backward in the current track by pressing and
holding the << RW button. Holding the << RW
button long enough will take you to the beginning
of the current track.
•
Jump forward in the current track by pressing and
holding the FF >> button.
•
A single press backward << RW or forward FF >> will
jump backward or forward respectively, for five
seconds.
•
Use the << SEEK and SEEK >> buttons to jump to the
previous or next track. If the << SEEK button is
pressed during the first two seconds of the track, it will
jump to the previous track in the list, if you press this
button at any other time in the track it will jump to the
UNDERSTANDING YOUR INSTRUMENT PANEL 243
4