Chrysler 300 Touring RWD 2010 Скачать руководство пользователя страница 117

Страница: 117 / 574

Using the mirror control switch, push on any of the four

arrows for the direction that you want the mirror to

move.
Power mirror preselected positions can be controlled by

the optional Memory Seat Feature. Refer to “Driver

Memory Seat” in “Understanding The Features Of Your

Vehicle” for further information.

Power Folding Outside Mirrors — If Equipped

The switch for the power folding mirrors is located

between the power mirror switches L (left) and R (right).

Push the switch once and the mirrors will fold in,

pushing the switch a second time will return the mirrors

to the normal driving position.

NOTE:

If the vehicle speed is greater than 10 mph

(16 km/h) the folding feature will be disabled.

If the mirrors are in the folded position, and vehicle

speed is equal or greater than 10 mph (16 km/h), they

will automatically unfold.

Heated Mirrors — If Equipped

These mirrors are heated to melt frost or ice. This

feature can be activated whenever you turn on the

rear window defroster (if equipped). Refer to “Rear

Window Features” in “Understanding The Features Of

Your Vehicle” for further information.

Illuminated Vanity Mirrors — If Equipped

An illuminated vanity mirror is located on the sun visor.

To use the mirror, rotate the sun visor downward and

swing the mirror cover upward. The light turns on

automatically. Closing the mirror cover turns off the light.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115

Содержание 300 Touring RWD 2010































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 300 Touring RWD 2010

Отзывы:

Бренды по названию

Популярные бренды

Chrysler 300 Touring RWD 2010, Руководство пользователя

Результаты поиска

Содержание 300 Touring RWD 2010

Отзывы:

Бренды по названию

Популярные бренды