1
/ 300 SRT8
®
SPECIFICATIONS
http://media.chrysler.com
300 SRT8
®
SPECIFICATIONS
2012 Chrysler 300 SRT8
®
SPECIFICATIONS
All dimensions are in inches (millimeters) unless otherwise noted.
All dimensions are measured at curb weight with standard tires and wheels.
Note: Information shown is correct at time of publication, and is subject to change without notice.
GENERAL INFORMATION
Body Style
E-segment sedan
Assembly Plant
Brampton Assembly Plant, Ontario, Canada
EPA Vehicle Class
Large car
Introduction Date
Summer 2011 as 2012 model
ENGINE: 6.4-LITER HEMI
®
V-8 WITH FUEL SAVER TECHNOLOGY
Availability
Standard
Type and Description
90-degree V-type, liquid-cooled
Displacement, cu. in. (cu. cm.)
392 (6,424)
Bore x Stroke
4.09 x 3.72 (103.9 x 94.5)
Valve System
Pushrod-operated overhead valves, 16 valves with sodium-filled
exhaust valves and hollow stem intake valves,
16 conventional hydraulic lifters, all with roller tips
Fuel Injection
Sequential, multi-port, electronic, returnless; automatic features
Fuel Saver mode
Construction
Deep-skirt cast-iron block with cross-bolted main bearing caps,
aluminum alloy heads with hemispherical combustion chambers
Compression Ratio
10.9:1
Power (SAE J2723)
470 hp (351 kW) at 6,000 rpm
Torque (SAE J2723)
470 lb.-ft. (637 N•m) at 4,300 rpm
Max. Engine Speed
6,400 rpm (electronically limited)
Fuel Requirement
Premium 91 octane (R+M)/2 — recommended
Oil Capacity, qt. (L)
7 (6.6)
Factory Oil Fill
5W-40 Synthetic
Coolant Capacity, qt. (L)
14 (13.25)
Emission Controls
Dual close-coupled three-way catalytic converters, quad-heated
oxygen sensors and internal engine features(a)
EPA Fuel Economy mpg (City/Hwy)
14/23
Assembly Plant
Saltillo Engine Plant, Saltillo, Mexico
(a) Meets Federal Tier 2 Bin 5 emission requirements and ULEV II requirements in California, Massachusetts, New York, Maine, Vermont,
Connecticut, Pennsylvania, Rhode Island, New Jersey, Oregon and Washington.
