Chrysler 300 SRT 2019, Руководство пользователя

Страница: 29 / 592

is detected outside the vehicle. The vehicle will
not unlock the doors when any of the following
conditions are true:
•
The doors are locked manually using the door
lock knobs.
•
There is a valid Passive Entry key fob outside
the vehicle and within 5 ft (1.5 m) of either
Passive Entry door handle.
•
Three attempts are made to lock the doors
using the door panel switch and then close
the doors.
To Enter The Trunk
With a valid Passive Entry key fob within 5 ft
(1.5 m) of the deck lid, push the button on the
right side of CHMSL (Center High Mounted Stop
Light), which is located on the deck lid.
NOTE:
If you inadvertently leave your vehicle’s Passive
Entry key fob in the trunk and try to close the
deck lid, the deck lid will automatically unlatch,
unless another one of the vehicle’s Passive
Entry key fobs is outside the vehicle and within
5 ft (1.5 m) of the deck lid.
To Lock The Vehicle’s Doors
With one of the vehicle’s Passive Entry key fobs
within 5 ft (1.5 m) of the driver or passenger front
door handles, push the door handle lock button
to lock all four doors.
Do NOT grab the door handle when pushing the
door handle lock button. This could unlock the
door(s).
NOTE:
•
After pushing the door handle button, you
must wait two seconds before you can lock or
unlock the doors, using either Passive Entry
door handle. This is done to allow you to
check if the vehicle is locked by pulling the
door handle, without the vehicle reacting and
unlocking.
•
The Passive Entry system will not operate if
the key fob battery is dead.
The vehicle doors can also be locked by using
the key fob lock button or the lock button located
on the vehicle’s interior door panel.
Automatic Unlock Doors On Exit
The doors will unlock automatically on vehicles
with power door locks if:
1. The Automatic Unlock Doors On Exit feature
is enabled.
Trunk Passive Entry Button
Push The Door Handle Button To Lock
Do NOT Grab The Door Handle When Locking
28