Chrysler 2008 PT Cruiser Скачать руководство пользователя страница 369 | Manualshive

Страница: 369 / 491

Chrysler 2008 PT Cruiser Скачать руководство пользователя страница 369

8. Remove the wheel blocks and lower the jack until it is
free. Stow the lug wrench, and jack in their designated
location. Secure all parts using the means provided.

WARNING!

A loose tire or jack thrown forward in a collision or
hard stop could endanger the occupants of the ve-
hicle. Always stow the jack parts and the spare tire in
the places provided. Have the deflated (flat) tire
repaired or replaced immediately.

9. Place the deflated (flat) tire in the cargo area, have the
tire repaired or replaced as soon as possible.

10. Check the tire pressure as soon as possible. Correct
pressure as required.

JUMP-STARTING PROCEDURES DUE TO A LOW
BATTERY

WARNING!

Take care to avoid the radiator cooling fan whenever
the hood is raised. It can start anytime the ignition
switch is on. You can be hurt by the fan.

WHAT TO DO IN EMERGENCIES

367

6

«
...
367
368
369
370
371
...
»

Содержание 2008 PT Cruiser












































































































































































































































































































































































































































































































Отзывы:

Нет отзывов