Chrysler 2008 Aspen Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 479

Chrysler 2008 Aspen Скачать руководство пользователя страница 47

6. To release the belt, push the red button on the buckle.
The belt will automatically retract to its stowed position.
If necessary, slide the latch plate down the webbing to
allow the belt to retract fully.

WARNING!

A frayed or torn belt could rip apart in a collision and
leave you with no protection. Inspect the belt system
periodically, checking for cuts, frays, or loose parts.
Damaged parts must be replaced immediately. Do
not disassemble or modify the system. Seat belt
assemblies must be replaced after a collision if they
have been damaged (bent retractor, torn webbing,
etc.). If the front airbags are deployed the front
pretensioning retractors must be replaced.

Adjustable Upper Shoulder Belt Anchorage

In the front and second row outboard seats, the shoulder
belt can be adjusted upward or downward to help
position the belt away from your neck. Push in on the
anchorage release button to release the anchorage, and
then move it up or down to the position that fits you best.

Adjusting Upper Shoulder Belt

46

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
45
46
47
48
49
...
»

Содержание 2008 Aspen
































































































































































































































































































































































































































































































Отзывы:

Нет отзывов