Chrysler 2008 Aspen Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 479

Chrysler 2008 Aspen Скачать руководство пользователя страница 25

•

For vehicles not equipped with the EVIC, perform the
following procedure:

1. Press and hold the UNLOCK button on the key fob.

2. After holding the UNLOCK button for four seconds,
also press the LOCK button within six seconds.

3. Release both buttons at the same time.

4. Test the flash lights with LOCK feature while outside
of the vehicle, by pressing the LOCK button on the key
fob with the ignition in the OFF position and the key
removed.

NOTE:

Pressing the LOCK button on the key fob while

you are inside the vehicle will activate the Security
Alarm. Opening a door with the Security Alarm activated
will cause the alarm to sound. Press the UNLOCK button
to deactivate the Security Alarm.

5. If the desired programming was not achieved or to
reactivate this feature, repeat the above steps.

Using the Panic Alarm

To activate the PANIC mode, while the ignition is OFF,
press and release the PANIC button on the transmitter
once. When the PANIC mode is activated, the interior
lights will illuminate, the head lights and parking lights
will flash and the horn will sound.

To cancel the PANIC mode, press and release the PANIC
button on the transmitter a second time. PANIC mode
will automatically cancel after three minutes or if the
vehicle is started or exceeds 15 mph (24 km/h). During
the PANIC mode, the door locks and Remote Keyless
Entry systems will function normally. PANIC mode will
not disarm the Security Alarm System on vehicles so
equipped.

24

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
23
24
25
26
27
...
»

Содержание 2008 Aspen
































































































































































































































































































































































































































































































Отзывы:

Нет отзывов