Chrysler 2008 Aspen Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 479

Chrysler 2008 Aspen Скачать руководство пользователя страница 19

WARNING!

The key cannot be turned to LOCK until the shift
lever is in the PARK position. Do not attempt to pull
the shift lever out of PARK after the key is in the
LOCK position.

NOTE:

The steering wheel will lock when the key is

removed, and when the steering wheel is turned around
115 degrees clockwise or 65 degrees counterclockwise
from the center position.

Ignition Accessory Delay Feature

The power window switches, radio, hands–free system
(if equipped), and power outlets will remain active for 10
minutes after the ignition switch is turned off. Opening
either front door will cancel this feature.

For vehicles equipped with the Electronic Vehicle Infor-
mation Center (EVIC), the time for this feature is pro-
grammable. For details, refer to “Personal Settings
(Customer-Programmable

Features)”/“KEY

OFF

POWER DELAY > OFF” under “Electronic Vehicle Infor-
mation Center (EVIC)” in Section 3 of this manual.

SECURITY ALARM SYSTEM — IF EQUIPPED

This system monitors the vehicle doors, liftgate, and
ignition for unauthorized operation. When the Security
Alarm System is activated, the system provides both
audible and visual signals. The horn will sound repeat-
edly for three minutes and the headlights and Security
light in the instrument cluster will flash for an additional
15 minutes. The engine will not run until the system is
disarmed.

18

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
17
18
19
20
21
...
»

Содержание 2008 Aspen
































































































































































































































































































































































































































































































Отзывы:

Нет отзывов