Chrysler 200 2017 Скачать руководство пользователя страница 434 | Manualshive

Страница: 434 / 557

Chrysler 200 2017 Скачать руководство пользователя страница 434

3. Apply the parking brake.

4. Place the transmission in PARK.

5. Turn the engine OFF.

6. Properly secure the front wheels to the dolly, following

the dolly manufacturer’s instructions.

7. Turn the ignition to the ON/RUN mode, but do not start

the engine.

8. Press and hold the brake pedal.

9. Release the parking brake.

10. Turn the ignition OFF.

11. Remove the key fob.

12. Release the brake pedal.

CAUTION!

•

DO NOT flat tow this vehicle. Damage to the drive-
train will result. If this vehicle requires towing,
make sure the drive wheels are OFF the ground.

•

Ensure that the Electric Park Brake is released, and
remains released, while being towed.

(Continued)

CAUTION!

(Continued)

•

Towing this vehicle in violation of the above require-
ments can cause severe transmission damage. Dam-
age from improper towing is not covered under the
New Vehicle Limited Warranty.

Recreational Towing — All-Wheel Drive (AWD)
Models

Recreational towing is not allowed. These models do not
have a NEUTRAL (N) position in the power transfer unit.

NOTE:

This vehicle may be towed on a flatbed or vehicle

trailer provided all four wheels are OFF the ground.

CAUTION!

Towing this vehicle with ANY of its wheels on the
ground can cause severe transmission and/or power
transfer unit damage. Damage from improper towing is
not covered under the New Vehicle Limited Warranty.

432

STARTING AND OPERATING

«
...
432
433
434
435
436
...
»

Содержание 200 2017














































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов