Chrysler 200 2017 Скачать руководство пользователя страница 433 | Manualshive

Страница: 433 / 557

Chrysler 200 2017 Скачать руководство пользователя страница 433

RECREATIONAL TOWING
(BEHIND MOTORHOME, ETC.)

Towing This Vehicle Behind Another Vehicle

Towing Condition

Wheel OFF the Ground

Front-Wheel Drive (FWD)

Models

All-Wheel Drive (AWD)

Models

Flat Tow

NONE

NOT ALLOWED

NOT ALLOWED

Dolly Tow

Front

OK

NOT ALLOWED

Rear

NOT ALLOWED

NOT ALLOWED

On Trailer

ALL

OK

OK

NOTE:

•

You must ensure that the Auto Park Brake feature is
disabled before towing this vehicle, to avoid inadvertent
Electric Park Brake engagement. The Auto Park Brake
feature is enabled or disabled via the customer program-
mable features in the Uconnect Settings.

•

When recreational towing your vehicle, always follow
applicable state and provincial laws. Contact state and
provincial Highway Safety offices for additional details.

•

If your vehicle is disabled and in need of commercial
towing service, refer to “Towing A Disabled Vehicle” in
“What To Do In Emergencies”.

Recreational Towing — Front-Wheel Drive (FWD)
Models

DO NOT

flat tow this vehicle. Damage to the drivetrain

will result.

Recreational towing for front-wheel drive models is al-
lowed

ONLY

if the front wheels are

OFF

the ground. This

may be accomplished using a tow dolly or vehicle trailer. If
using a tow dolly, follow this procedure:

1. Properly secure the dolly to the tow vehicle, following

the dolly manufacturer’s instructions.

2. Drive the front wheels onto the tow dolly.

5

STARTING AND OPERATING

431

«
...
431
432
433
434
435
...
»

Содержание 200 2017














































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов