Chrysler 200 2017 Скачать руководство пользователя страница 240 | Manualshive

Страница: 240 / 557

Chrysler 200 2017 Скачать руководство пользователя страница 240

WARNING!

(Continued)

•

Do not touch with wet hands.

•

Close the lid when not in use.

•

If this outlet is mishandled, it may cause an electric
shock and failure.

CUPHOLDERS

Front Seat Cupholders

The cupholders are located in the center console forward of
the armrest between the front seats.

Rear Seat Cupholders

The rear seat cupholders are located in the center armrest
between the rear seats. The cupholders are positioned
forward in the armrest and side-by-side to provide conve-
nient access to beverage cans or bottles while maintaining
a resting place for the rear occupant’s elbows.

STORAGE
Glove Compartment

The glove compartment is located on the passenger side of
the instrument panel. Pull on the release handle to open the
glove compartment.

Front Seat Cupholders

Rear Seat Cupholders

238

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
238
239
240
241
242
...
»

Содержание 200 2017














































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов