www.ChronoRemoteControl.com
Manual
FAAC:
XT2 868 SLH, XT4 868 SLH and XT2 868 SLH Black
Programming Manual for FAAC remote controls from SLH series.
PRINCIPLE:
Each new remote control has its own code and is able to copy the code
of another remote control. Upon the first installation, we register the first remote
control which transmits its code to the radio receiver. Then we register the additional
remotes by copying the code of the 1
st
remote control.
Remote control MASTER / SLAVE
In this series of remote controls, there are:
1)
MASTER remote controls (LED flashes once and then remains lit steady when
the button is held), which can initialize another remote, and they can be
initialized themselves.
2)
SLAVE remote controls (constant light illuminated when the remote control
button is kept pressed) which cannot initialize another remote control.
CAUTION:
If you activate more than 32 times the button on the remote, outside the
scope of the receiver, the remote control is no longer recognized by the receiver (due
to the FAAC SLH security rolling code).
To re-synchronize the remote control, press 2 times within five seconds, the button on
the remote control concerned.
