www.ChronoRemoteControl.com
Manual
Aperto TX02 868-4
1.
Open the cover of the light box
2.
Press 1 time the P button. (PRESS THE BUTTON ONLY ONCE!)
Note: If you pressed repeatedly P button, turn off the power for 1 minute before
resuming the setup procedure.
The indicator lights up and you have 5 seconds to register your new remote control.
1) Take the new remote control and press the button for 2 seconds.
2) Repeat the operation for all your new remote controls.
HOW TO ERASE ALL PREVIOUSLY REGISTERED REMOTE CONTROLS
(RAZ)
Hold the P button for more than 25 seconds until the 2 indicator lights will enlighten.
