Chromalox MWS 300-600 kW Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 12

Chromalox MWS 300-600 kW Скачать руководство пользователя страница 10

10

Figure 2 Optional Piping Accessory Assembly

Start-Up Supervision

Factory trained personnel are highly recommended

for those customers who are unfamiliar with the initial

start-up.

Contact your local Chromalox sales office or call the

Chromalox Service Center: 1-800-443-2640.

Maintenance

Factory trained personnel are recommended for those

unfamilar with proper system maintenance.

Contact your local Chromalox sales office or call the

Chromalox Service Center: 1-800-443-2640.

Maximum Temperatures

DO NOT attempt to operate any heat transfer system

at temperatures higher than those recommended by

the manufacturer.
Chromalox heat transfer systems are designed for a

particular maximum temperature. If you do not know

this design temperature, check with the Chromalox

factory. Exceeding the designed temperature of the

heat transfer system will void the warranty.
Exceeding the temperature limits of the heat transfer

fluid will cause its thermal breakdown or degradation.

Strainer

Fill Connection

Note: All piping add-on accessories must be adequately supported to avoid damage to pump.

Inlet / Outlet Gate Valves

Inlet / Outlet Gate Valves

«
...
8
9
10
11
12
»

Содержание MWS 300-600 kW













Отзывы:

Нет отзывов