- 6 -
© 2014 Chromalox
®
, Inc.
1-888-996-9258
Installation Section
(continuation of page 5)
The forced air design of the MaxPac series allows mounting in any direction. It is essential that air flow through
the enclosure be planned to insure proper cooling.
The 100 amp through 300 amp open design MaxPac allow the input line power to connect from either of two directions.
The output power can only be connected from one direction. The three mounting configurations
are shown below (MaxPac II Three-Phase Two-Leg Shown).
Open designs above 300 amps and all closed designs allow incoming
and outgoing wiring in either direction.
In
In
Configuration One
Cool Air In
Warm Air Out
Fan
Phase 1
Phase
3
or In
Out
or In
Out
Configuration Two
Out
Out
In
In
Warm Air Out
Cool Air In
Phase 1
Phase
3
Fan
or In
or In
Configuration Three
Warm Air Out
Out
Phase
3
or In
In
Out
Phase 1
In
or In
Fan
Cool Air In