Chromalox IntelliTRACE Скачать руководство пользователя страница 3

3

Important Information

All information, including illustrations, is believed to be 

reliable. Users, however, should independently evalu-

ate the suitability of each product for their particular 

application. Chromalox, Inc. makes no warranties as to 

the accuracy or completeness of the information, and 

disclaims any liability regarding its use.
Chromalox’s only obligations are those in the Chro-

malox Standard Terms and Conditions of Sale for this 

product, and in no case will Chromalox, Inc. or its rep-

resentatives, distributors or employees be liable for any 

incidental, indirect, or consequential damages arising 

from the sale, resale, use, or misuse of the product.
Specifications are subject to change without notice. In 

addition, Chromalox, Inc. reserves the right to make 

changes—without notification to Buyer—to processing 

or materials that do not affect compliance with any ap-

plicable specification.

License Agreement

IntelliTRACE

®

 Supervisory Controller

IntelliTRACE

®

 Supervisory Software

(c) Copyright 2011 Chromalox, Inc. All Rights Reserved.

END-USER LICENSE AGREEMENT (“EULA”) FOR THIS SOFTWARE PRODUCT: IMPORTANT-READ CAREFULLY!

This EULA is a binding legal agreement between you 

(either an individual or a single entity) and the men-

tioned author of this Software for the SOFTWARE 

PRODUCT identified above, which includes computer 

software and may include associated media, printed 

materials, and “online” or electronic documentation 

(“SOFTWARE PRODUCT”). By installing, copying, or 

otherwise using the SOFTWARE PRODUCT, you agree 

to be bound by the terms of this EULA.
The SOFTWARE PRODUCT is protected by copyright 

laws and international copyright treaties, as well as 

other intellectual property laws and treaties. The SOFT-

WARE PRODUCT is licensed by the author, not sold.
Installation packages created by the SOFTWARE 

PRODUCT may contain, among other things, a portion 

of the SOFTWARE PRODUCT, including copyrighted 

software, proprietary notices, and identifying informa-

tion (the “Extraction Software”).
You may not alter or modify the Extraction Software.  

You are not authorized to give to anyone else the per-

mission to modify the Extraction Software. 
You may not reverse engineer, decompile, or disas-

semble any parts of the SOFTWARE PRODUCT except 

and only to the extent that such activity is expressly 

permitted by applicable law notwithstanding this limi-

tation.
The Author of this Software expressly disclaims any 

warranty for the SOFTWARE PRODUCT. You acknowl-

edge that the SOFTWARE PRODUCT is provided “as 

is” and “with all faults, defects and errors” without war-

ranty of any kind, either express or implied, including, 

without limitation, the implied warranties or merchant-

ability, fitness for a particular purpose, or non-infringe-

ment, and that all use of the Program is at your own full 

risk. The entire risk arising out of use or performance of 

the SOFTWARE PRODUCT remains with you.
In no event shall the author of this Software be liable 

for any damages whatsoever (including, without limi-

tation, damages for loss of business profits, business 

interruption, loss of business information, or any other 

pecuniary loss) arising out of the use of or inability to 

use this product, even if the Author of this Software 

has been advised of the possibility of such damages. 

Because some states / jurisdictions do not allow the 

exclusion or limitation of liability for consequential or 

incidental damages, the above limitation may not apply 

to you. In this case the Author of this Software will only 

be liable for the amount of money you spent for this 

SOFTWARE PRODUCT in exchange for the return of 

the product, all copies, registration papers and manu-

als, and all materials that constitute a transfer of own-

ership from the customer back to the Software Author. 
Without prejudice to any other rights, the Author of this 

Software may terminate this EULA if you fail to comply 

with the terms and conditions of this EULA. In such 

event, you must destroy all copies of the SOFTWARE 

PRODUCT and all of its component parts. 

Содержание IntelliTRACE





























Отзывы: