manualshive.com logo in svg

Chromalox IntelliTRACE, Руководство по установке и эксплуатации, Страница: 20 / 28

Поделиться
Скачать
Chromalox IntelliTRACE Скачать руководство пользователя страница 20

20

Output Mapping

Output Power Sensing
A single Output demand value may be mapped to multiple Circuits. This allows several circuits to be controlled by 

a single Output demand value.  

Minimum, Maximum, Averaging
Several Output demand values may be mapped to a single output circuit. This allows that circuit to be controlled 

by the Minimum or the Maximum or the Average Output demand value of all of the Outputs that are mapped to 

that single Circuit.    

Multiple Output Mapping
A single output demand value may be used independently or combined with other output demand values to con-

trol more than one circuit.  

For Example:  
The average output demand value of circuits 1, 3 & 5 is used to control Circuit 1 while simultaneously 

the maximum Output demand value of Circuits 3, 4 & 5 is used to control Circuit 2.  

Output Mapping is accomplished within the I/O Mapping Tab found in the Setup Form Page. See Figure 15.

Figure 15

Содержание IntelliTRACE





























Отзывы:

Нет отзывов