manualshive.com logo in svg

Chromalox IntelliTRACE, Руководство по установке и эксплуатации, Страница: 16 / 28

Поделиться
Скачать
Chromalox IntelliTRACE Скачать руководство пользователя страница 16

16

Mass Settings

Some networks have an extremely high quantity of circuits or the same parameter settings across many circuits 

and/or Panels (Systems). In order to make the programming process more efficient in these instances, the intel-

liTRACE Supervisory Controller employs an 

Apply Settings Globally feature and a Synchronize Settings feature. 

Apply Settings Globally

The Apply Settings Globally feature allows the user to apply settings from a single loop to all of the remaining loops 

within the panel (system). Within Loop #1 on the Setpoints Tab (See Figure 11), complete the input of the parame-

ters and then select the “Apply Globally” button to mirror these settings across all loops 

within that panel (system).   

Synchronize Settings

The intelliTRACE Supervisory Controller also offers a feature which allows the user to apply the settings from one 

system (panel) to any or all of the remaining systems (panels) on the network. Press the Sync button at the bottom 

of the Main Screen to reveal the Sync Form. See Figure 12.

The Source List of panels is on the left and a Destination List of panels is on the right. Choose which destination 

panels are to receive the source settings. 

The settings from Circuit #1 of the Source Panel will be applied to all of the circuits of the selected Destination 

Panels.  

Figure 12

Содержание IntelliTRACE





























Отзывы:

Нет отзывов