11
Construct Your IntelliTRACE System
Security Levels & Password Screen
After you have initiated the intelliTRACE Panel
Network as instructed above, you may now take
the proper steps to begin to add Individual intel-
liTRACE panels to your system. They will appear
in the System Tree Pane on the left as well as in
the Panel List on the right.
Launch the intelliTRACE program.
You will be presented with the screen as seen
in Figure 2.
Before Adding or Editing a System, you must first
gain access to the program.
Select the
Login
button along the bottom of
the screen to gain access to the program. The
Login screen will appear requesting a password.
See Figure 3.
Should you wish to logout of the system, simply
select the
Logout
button.
Initial factory set passwords and their pre-defined accessibility & rights for the below levels of Security are:
Level
Title
Code
Accessibility/Rights
4
Manager
999
All pages, all passwords & all Setpoints editing
3
Engineer
55
All pages, Engineer password & all Setpoints editing
2
Supervisor
20
Setpoints, Tuning & I/O Mapping Tabs editing
1
Operator
100
Setpoints Tab. Temperature Set Point editing
To change these passwords, access the Application Setup window by pressing the Configure Button at the bottom
of the Main Screen.
Enter the appropriate password and then hit
OK
to continue.
Figure 2
Figure 3