Chromalox IntelliTrace ITC 2 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 32

Chromalox IntelliTrace ITC 2 Скачать руководство пользователя страница 4

4

Introduction

For nearly a century, customers have relied upon Chro-

malox for premiere quality and innovative solutions for

industrial heating applications. Chromalox manufac-

tures the world’s largest and broadest line of electric

heat and control products.
The

intelliTRACE

TM

family of heat tracing products

continues to expand with its latest single or two circuit

controllers the ITC1 & ITC2. These are a complete tem-

perature control and system management solutions for

electrical heat trace applications. They are designed

for industrial applications in ordinary or Class I, Division

2. Groups A,B,C & D hazardous locations.
The

intelliTRACE

TM

ITC1 & ITC2 provides the user with

an easy to navigate menu system, continuous critical

parameter monitoring, application flexibility and equip-

ment safety precautions.
The ITC is an ideal solution either Freeze Protection or

Process Temperature control. Whether you have Ambi-

ent or Line Sensing or a combination of both, the ITC is

the affordable and complete system for you.

intelliTRACE

TM

ITC Features:

•  1 & 2 Circuit Models
•  100 – 277 VAC, 50/60 Hz
•  SSR Control, 40 Amps per Circuit
•  PID, On/Off or Manual Control Modes
•  Selectable Soft Start Feature
•  ModBus Communications

• RTU/RS485 (& 422)

• TCP/Ethernet
• Full Monitoring & Alarms

• High / Low Temperature

• High & Low Current

  • GFEP & Sensor Failure
•  Programmable Duty Cycle On Sensor Failure
•  Alarm Indication & Announcement
•  Password Protected Security Levels
•  NEMA 4X Fiberglass or 316 SS Wall Mount Enclosure
•  LED Indication for Power, Load & Alarm per Circuit
•  Front Panel Capacitive Touch Switches
•  One or two Sensor Inputs / Circuit – Min, Max & Av-

eraging

• 2 Circuit Ambient control from a single RTD sensor

• High Resolution TFT Display:

• 2 Circuits displayed / screen (on 2 Circuit unit)

• Displayed Parameters: Process Variable, Set

Point Temperature, Control Mode, Soft Start sta-

tus, Load demand, Alarm Status

Agency Approvals:

• UL, cUL Ordinary Areas, Class I Division 2 areas
• CE

Options:

• Ethernet Communications (TCP/Ethernet or web

server/Ethernet)
• Wireless Communications (Consult Sales)
• 12” x 10” x 8” NEMA 4X 316SS Wall Mount Enclosure

IMPORTANT: To comply with NEC code,

one of the following must apply.

1. Customer supplied 2 pole GFEP breaker in branch

circuit breaker box upstream of the controller

2. Requirement shall not apply in industrial es-

tablishments where there is alarm indication of

ground faults and the following conditions apply:

a. conditions of maintenance and supervison

ensure that the qualified person(s) service the

installed heater.

b. continued circuit operation is necessary for

safe operation of equipment or process.

«
...
2
3
4
5
6
...
»

Содержание IntelliTrace ITC 2

































Отзывы:

Нет отзывов