Chromalox IntelliTrace ITC 2 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 32

Chromalox IntelliTrace ITC 2 Скачать руководство пользователя страница 17

17

The Systems Menu

Security Level 3
The System Menu provides access to system information and system settings for the ITC. Items contained in the
System Menu include: Firmware Version of the ITC, Button Sound for Keypad interaction, Units (Temperature), Tem-
perature Sensing Type, Failed Sensor Output, (Security) Password for Levels 1, 2 & 3, Alarm State (normally open or
normally closed) Restore to Default (Settings & Parameters).

7. System Menu

Firmware Version

Identifies the Firmware Release of your ITC.

Button Sound

The Button Sound may be kept ON or turned OFF

Units

Temperature Units, Fahrenheit or Celsius

Temp Sensing 1

The ITC accepts up to two RTD inputs per channel. In Auto Control Mode, the output

of each circuit will function according to the Temp Sensing Setting. However, when

in Manual Mode, the Output will only consider the Output % as selected by the User.

The following settings and their respective function are available when in AUTO Mode:
• Single – Output is based on the sensed temperature of only one RTD sensor. The

2nd RTD Sensor is not recognized.

• Average – Output is based on the average sensed temperature of the two RTD Sen-

sors. If Average is selected and only one sensor is employed, the unit will sense

an open sensor. See Failed Sensor Operation below.

• Low – Output is based on the lowest sensed temperature of the two RTD Sensors.

If Low is selected and only one sensor is employed, the unit will sense an open

sensor. See Failed Sensor Operation below.

• High – Output is based on the highest sensed temperature of the two RTD Sensors.

If High is selected and only one sensor is employed, the unit will sense an open

sensor. See Failed Sensor Operation.

7. SYSTEM MENU PAGE 1/2

FIRMWARE VERSION
BUTTON SOUND
UNITS
TEMP. SENSING 1
TEMP. SENSING 2
FAILED SENSOR OUTPUT 1
FAILED SENSOR OUTPUT 2

CKT 1 AUTO 0%
CKT 2 AUTO 0%

7. SYSTEM MENU PAGE 2/2

PASSWORD LEVEL 1
PASSWORD LEVEL 2
PASSWORD LEVEL 3
ALARM STATE
RESTORE TO DEFAULT

CKT 1 AUTO 0%
CKT 2 AUTO 0%

«
...
15
16
17
18
19
...
»

Содержание IntelliTrace ITC 2

































Отзывы:

Нет отзывов