38
LED State
LED status refers to the corresponding parameter, with the following special cases:
• LED RN (green) on: hotkey functionality
• LED RN (green) + LED ER (red) both flashing rapidly: autobaud in progress
• LED ER (red) on: error in one of main inputs (Lo, Hi, Err, Sbr)
• LED ER (red) flashing: temperature alarm ((OVER_HEAT or TEMPERATURE_SENSOR_BROKEN) or alarm of
SHORT_CIRCUIT_CURRENT or SSR_SAFETY or FUSE_OPEN (only for single phase configuration).
• LED ER (red) + LED Ox (yellow) both flashing: HB alarm or POWER_FAIL in zone x
• All LEDs flashing rapidly: ROTATION123 alarm (only for three phase configuration)
• All LEDs flashing rapidly except LED DI1: jumper configuration not provided
• All LEDs flashing rapidly except LED DI2: 30%_UNBALANCED_ERROR alarm (only for three phase configuration)
• All LEDs flashing rapidly except LED O1: SHORT_CIRCUIT_CURRENT alarm (only for three phase configuration)
• All LEDs flashing rapidly except LED O2: TRIPHASE_MISSING_LINE_ERROR alarm (only for three phase con-
figuration)
• All LEDs flashing rapidly except LED O3: SSR_SAFETY alarm (only for three phase configuration)
• All LEDs flashing rapidly except LED BUTTON: FUSE_OPEN alarm (only for three phase configuration)
Description of Rotary Switches
Switch
Description
x10
x1
Defines address of module 00...99
(in case of CFW compatible mode (dip switch 7= ON), this address is attributed to the CFW
Master module; the expansions, if present, will have a1 (CFW Expanasion Slot 1) and
a2 (CFW Expansion Slot 2)) Hexadecimal combinations are reserved.
Содержание CFW
Страница 2: ...ii...