21
5.7 Connection of Expansion Modules (for 2-Phase or 3-Phase Configuration)
CARRY OUT THE FOLLOWING STEPS:
1. Remove the master module side cover by undoing
the fastening screws
2. Connect the flat cables supplied with the expan-
sions to CPU card by inserting them into the ap-
propriate connectors.
3. Fix the side cover of the master with the specific
screws
4. Remove the front cover of the expansion modules
undoing the fastening screw of the cover and cor-
rectly install the master module and the expansion
module to the panel as described at paragraph 2.4.
5. Fasten the screw to secure the product in position.
6. Connect the two flat cables from the CPU card by
inserting them into the correct connector of expan-
sion.
7. The cables flat already are inserted in the indicated
connector of the expansion
8. Do not pull the flat cable to avoid to damage it.
9. Place the flat cable into the product and close the
front cover of expansions.
10. Check the front covers are properly closed with the
screws.
CFW-E
CFW-E
CFW-M
Содержание CFW
Страница 2: ...ii...