Christie Velvet Apex A2L Series, Инструкция по установке и настройке, Страница: 11 / 42

Cable and controller layout and design
Before an array is constructed, you must plan the design layout of the tiles to make sure that the
controller placement and the cabling layout support the overall tile design objectives.
The LED display system offers considerable flexibility in terms of the number of media sources that
can be displayed and the overall resolution. Color and brightness matching, as well as other functions,
may be performed across an entire array.
Controller limitations
Each controller can support a maximum number of tiles, which varies depending on the pixel pitch of
the tiles in the array. The configuration to achieve an HD display differs by the pixel pitch of the tile, as
outlined in the table below.
E500 controller
Tile Pixel pitch Array size Maximum number of tiles per controller
LED012-A2L 1.2 mm 4 x 4 16 tiles
LED016-A2L 1.6 mm 5 x 5 25 tiles
LED019-A2L 1.9 mm 6 x 6 36 tiles
LED025-A2L 2.5 mm 8 x 8 64 tiles
E600 controller
Tile Pixel pitch Array size Maximum number of tiles per controller
LED012-A2L 1.2 mm 8 x 8 64 tiles
LED016-A2L 1.6 mm 10 x 10 100 tiles
LED019-A2L 1.9 mm 12 x 12 144 tiles
LED025-A2L 2.5 mm 16 x 16 256 tiles
Product overview
Velvet LED Display System Installation and Setup Guide–Apex A2L Series 11
020-102873-01 Rev. 1 (06-2018)
Copyright
©
2018 Christie Digital Systems USA, Inc. All rights reserved.