Christie Terra Скачать руководство пользователя страница 76

Страница: 76 / 106

Terra Manager

Terra User Manual

020-102838-10 Rev. 1 (05-2020)
Copyright

HDR

The format for HDR (High Dynamic Range) setting: HDR10 SMPTE

2084, HLG, Dolby Vision source dependent.

Audio

Number of

Channels

Source dependent. Number of channels- 2-channel, 6-channels,

8-channels.

Sampling

Frequency

Sampling frequency in Hz (32KHz, 44.1kHz, 48kHz, 88.2kHz,

96kHz, 176.4kHz, or 192 kHz). Not set in Terra manager,

encoding type is a function of the source.

Encoding Type

Audio Encoding type: LPCM, HBR. Not set in Terra manager,

setting is obtained from the source.

Downmix

Set on Audio tab.
Enabled = Yes
Disabled = No.

EDID

Current EDID

Name of current EDID file.

Operation Mode: Organizing Layouts and Sources

Layouts and sources can be organized into groups using the group feature. New groups can be

created, or items can be moved to existing groups. When an item is added to a group, the group

name is displayed in the item list. Items in groups can be sorted alphabetically (ascending and

descending) and they can be moved to another position in the group list using the up and down arrow

buttons.

Operation Mode: Delete a Layout

To delete a layout:

Highlight the layout name in the Layouts list.

Click the arrow to expand the layout’s options.

Click

Delete

Operation Mode: Recall a Layout

To recall a layout and display it on the Display Array:

Navigate to the

Operation Mode

page.

Click

Layouts

Click the Layout name from the Layout List and drag it to the desired location; or click

Apply

next to the name to apply the layout to the Display Array it was created on.

Содержание Terra







































































































Результаты поиска

Содержание Terra

Отзывы:

Похожие инструкции для Terra

Бренды по названию

Популярные бренды

Christie Terra, Руководство пользователя

Результаты поиска

Содержание Terra

Отзывы:

Похожие инструкции для Terra

Бренды по названию

Популярные бренды