Terra Manager
Terra User Manual
52
020-102838-10 Rev. 1 (05-2020)
Copyright
©
2020 Christie Digital Systems USA Inc. All rights reserved.
1.
Select the transmitter(s) and/or receiver(s).
Hint: You can multi-select (group-select) devices to configure more than one device.
2.
Select from the following settings:
Baud
The speed data is sent over the RS-232 line. Default is 57,600.
Data Bit
Number of data bits. Default is 8.
Stop Bit
Period of time before the next start bit can be transmitted. Default is 1.
Parity
Error detection mechanism. Default is None.
3.
To save changes, click
Save
associated with the device(s) or click
Save All
if multiple devices
are selected.
Configuration Page
USB Subpage (TX and RX)
Use this subpage to view and set the USB filter to allow or block data from specific USB devices.