Terra Manager
Terra User Manual
39
020-102838-10 Rev. 1 (05-2020)
Copyright
©
2020 Christie Digital Systems USA Inc. All rights reserved.
Displays Tab: Assign Receivers to a Display Array
Receivers are automatically discovered by their MAC Address when the Controller is configured. A list
of Receivers (sorted alphabetically by their MAC Address) is displayed in the left panel of the
Configuration page. One Receiver is assigned to each of the displays in the display array.
New devices are added to the list when they are found.
To assign Receivers to the Display Arrays:
1.
From the Displays subpage on the Configuration page, navigate to the desired Display Array.
2.
Click to expand the display array.
3.
Click the Receiver name (default: MAC Address) of the desired Receiver and drag it to the
desired location in the Display Array. Best practice is to name receivers to help identify their
position in a Display Array; for example: RX1 for display 1, RX2 for display 2, etc.
Use the Search tool to search for a specific Receiver.
Use the Zoom tool to change the visible view of the display array.
When a Receiver is assigned to a Display Array, it is removed from the list of available receivers.
