Changing the IP address of the NAS-S2
Configure the IP address of the Christie NAS-S2 to be on a different subnet than the GDC IMB. This
example sets the IP address of the Christie NAS-S2 to 10.10.10.101.
The Christie NAS-S2 has a default IP address of 192.168.1.101. The following steps assume you are
starting with this default IP address.
1. Set the IP address of the computer.
The IP address of your computer must be different than the IP address of the Christie NAS-S2
but must be on the same subnet. For example:
IP address
192.168.1.103
Subnet
255.255.255.0
2. Open a web browser and navigate to the Christie NAS-S2 web interface at
http://
192.168.1.101:8080/
.
3. Log into the Christie NAS-S2.
Default user ID
admin
Default password
cdsclub
4. Go to Network.
For NAS-S2
version 4.3.3
a.
On the dashboard, click Network.
For NAS-S2
version 4.1.0
a.
In main menu, select Control Panel.
b.
Select System Settings > Network.
5. In the TCP/IP tab of the Network page, click Edit for the Ethernet1 interface.
6. In the TCP/IP - Property dialog, enter the following values under the Network Parameters tab:
Field Name
Value
Fixed IP Address
10.10.10.101
Subnet Mask
255.255.255.0
Default Gateway
10.10.10.1
Configuring Christie NAS-S2 for GDC SR-1000 IMB
Christie NAS-S2 Configuration for GDC IMB Instruction Sheet
2
020-102909-02 Rev. 1 (01-2019)
Copyright
©
2019 Christie Digital Systems USA, Inc. All rights reserved.
