Christie Mirage 4K40-RGB, Техническое описание

Страница: 12 / 21

The following table describes the available Light & Output Settings functions when LiteLOC is enabled
or disabled.
LiteLOC mode R/G/B sliders Master Laser Power White x,y
Disabled Enabled Disabled Disabled
LiteLOC 1.0 Disabled Disabled Disabled
LiteLOC 2.0 Disabled Enabled Enabled
Resolution
1. Ensure the lasers are on.
2. To adjust the red, green, and blue laser power independently, disable LiteLOC.
Master laser power slider greyed out
The master laser power slider is greyed out.
Details
Possible causes for why the Master Laser Power slider is not enabled include:
• LiteLOC ™ version 2.0 is not enabled. For details on the available Light & Output Settings
functions when using LiteLOC, refer to the "RGB sliders greyed out (on page 11)" topic.
• The color sensor board (CSBD) has not been calibrated for LiteLOC version 2.0.
Resolution
1. Ensure LiteLOC version 2.0 has been selected.
2. Calibrate the system for LiteLOC version 2.0.
Color on the screen is not stable
Why is the color on the screen not stable?
Details
Possible causes include:
• The brightness slider is lower than 30%.
• LiteLOC
™
is not enabled.
• The room temperature is not stable.
• Relative humidity exceeds 80%.
• Color sensor calibration was done incorrectly.
• You may have changed the brightness or color points and they can take several minutes to
stabilize.
4K40-RGB troubleshooting
4K40-RGB Technical Reference–Troubleshooting 12
020-103239-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.