background image

- 1 -

LCD PROJECTOR

LENS REPLACEMENT AND INSTALLATION PROCEDURES

CAUTION

When installing or replacing the Projection Lens, refer to this manual. For
installation of the lens, use the parts designated in the manual. Do not use the
installation manual and Light-Block Sheets in the lens package.
Check the following parts supplied to this projector.

NOTES ON LENS INSTALLATION

Lens installation and replacement should be made by the qualified service
personnel.

Be sure to install the lens following this procedure precisely.

Do not touch or remove any parts except the lens and related parts. It may
result in malfunctions, electrical shock, fire hazard  or other accidents.

Before installing or replacing the lens, check that the Model No. of the
Projection Lens matches to the projector.

When moving or setting up the projector, be sure to replace the Lens Cover
to protect the surface. And be careful not to hold or subject the lens to
strong forces. It may damage the lens, cabinet, or mechanical parts.

For details of the lens and installation, contact the sales dealer where you
purchased the projector.

●  

LIGHT-BLOCK SHEETS    6 pcs.

●  

LENS ATTACHMENT (01) 1 pce.

●  

LENS ATTACHMENT (02) 1 pce.

1AA6P1P3900-- (MC7K) 

This projector applies the Projection Lenses listed below. Use the suitable lens for
where the projector is used.

AVAILABLE LENS

Model NO.

38-809036-02

38-809041-02

38-809042-02

38-809037-02

38-809040-02

38-809038-02

38-809039-02

Type

Fixed Short Throw Lens

Fixed Long Throw Lens

Long Throw Zoom Lens

Short Throw Zoom Lens 

I

Semi-Long Throw 

Zoom Lens

Standard Zoom Lens 

II

Standard Zoom Lens 

I

Zoom

Motor Driven

Fixed

Manual

Focus

Fixed

Motor Driven

Motor Driven

Motor Driven

Motor Driven

Manual

Motor Driven

Motor Driven

Motor Driven

Motor Driven

Motor Driven

38-809043-02

38-809044-02

Short Throw Zoom Lens 

II

Standard Zoom Lens 

III

Fixed

Manual

Motor Driven

Motor Driven

Содержание LX1500








Отзывы: