manualshive.com logo in svg

Christie IMB-S3, Руководство пользователя

Поделиться
Скачать
Christie IMB-S3 Скачать руководство пользователя страница 33

Managing automation

Automation controls playback, the projector, and external devices. The Christie IMB includes built-in

support for some external automation devices. If the device is not supported, you can use the serial-

over-Ethernet protocol to send automation commands.
This section provides instructions for managing and defining:

•

Macros: A macro is a list of actions that you define. For example, opening the curtains or
turning on the house lights at the end of playback. A macro can be activated by a global
trigger, or it can be added to a playlist.

•

Device input triggers: Input cues wait for events such as a general purpose input (GPI) state
change or an Ethernet message. An input cue in a playlist delays playback until an event
occurs. In a global trigger, a macro runs when an input cue event occurs. These are the
available input cues:

Automation Device

Action

Description

Projector

Lamp Off Event

An event starts when the lamp
turns off.

IMB automation

Serial String Input

Waits for a serial string.

IMB automation

GPI Wait

Waits for a GPI event. Not
available on Solaria One or
Solaria One+.

•

Global triggers: A global trigger combines an input cue with a macro. When the predefined
event for the input cue occurs, the output macro is triggered. For example, a fire alarm input
signal stopping playback to stop and turning on the house lights. A global trigger is always
active and is not dependent on specific playlist definitions.

Available macro actions

These are the macro actions that are available to control automated events:

Action Item

Available Actions

Description

Automation

Set Global

Allows you to set a global variable that can be used in
automation scripting (intended for advanced scripting by
Christie)

Print

Generates a projector log entry when an automation macro
runs

Get Global

Allows the automation script to read the value of a global
variable (intended for advanced scripting by Christie)

Set GPO

Sets the specified GPO pin to high or low

Pulse GPO

Pulses the specified GPO pin

 

Christie IMB-S3 User Guide

33

020-102584-04 Rev. 1 (02-2020)

Copyright 

©

 2020 Christie Digital Systems USA, Inc. All rights reserved.

Содержание IMB-S3






















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды