Christie FHD554-XZ-H, Руководство пользователя

Страница: 27 / 58

FHD554-XZ-H and FHD554-XZ-HR LCD Panels User Guide
020-001725-01 Rev. 1 (11-2019)
Copyright © 2019 Christie Digital Systems USA, Inc. All rights reserved.
Installing a display panel
27
Connecting an RS232 or an Ethernet controller to a video wall in
landscape orientation
Complete the following steps to connect an RS232 or an Ethernet controller to a video wall in
landscape orientation.
It is not recommended that more than 25 display panels be daisy-chained together using the RS485 input
and outputs. If you are working with a video wall that exceeds 25 display panels, consider breaking the
video wall into groups of 25 display panels or less, and then use separate RS232 or Ethernet connections to
control each group.
To control a video wall using the IR remote control, plug the IR extender into the first display panel in the
daisy-chain.
1. Connect the controller to the top-left or bottom-left display panel.
2. Connect the remaining panels as illustrated.
Connecting an RS232 or an Ethernet controller to a video wall in
portrait orientation
Complete the following steps to connect an RS232 or an Ethernet controller to a video wall in portrait
orientation.
It is not recommended that more than 25 display panels be daisy-chained together using the RS485 input and
outputs. If you are working with a video wall that exceeds 25 display panels, consider breaking the array in to
groups of 25 display panels or less, and then use separate RS232 or Ethernet connections to control each
group.
When you create a video wall in portrait orientation, both the video source and the content must be
configured for use in a 9:16 format.
1. Connect the controller to the top-left or the top-right display panel.