Christie FHD554-XZ-H, Руководство пользователя

Страница: 20 / 58

FHD554-XZ-H and FHD554-XZ-HR LCD Panels User Guide
020-001725-01 Rev. 1 (11-2019)
Copyright © 2019 Christie Digital Systems USA, Inc. All rights reserved.
Installing a display panel
20
Connecting to an AC power source (FHD554-XZ-H only)
Use the power cord that comes with the display panel to connect the panel to an external power source, such
as an AC wall outlet.
Installing and configuring the Remote Power Rack
Shelf (FHD554-XZ-HR only)
Use the following instructions to install and configure the Remote Power Rack Shelf external power supply.
Required tools
Make sure the following tools are available during the installation.
Remote Power Rack Shelf installation tools
• Screwdrivers
• Molex Crimping Tool (P/N: 154-124108-XX)
If the power cord supplied with your product is not long enough to connect the first display panel in an
array to the Remote Power Rack Shelf module, you must purchase a power cord of an adequate
length. Christie recommends one of the pre-terminated power cables offered as Christie accessories,
or that you create a custom cable using the Christie Main Power Cable Spool (P/N 154-122106-XX),
Connector Kit (P/N 154-125109-XX), and Molex Crimping Tool (P/N 154-124108-XX). For more
information on the Molex Crimping Tool, see the Molex documentation.
Mounting the Remote Power Rack Shelf
The power system must be mounted in a clean and dry environment. Sufficient free space must be provided
at the front and rear of the power system.
1. Find a location in the rack for a 3U device.
2. Attach the Remote Power Rack Shelf to the rack.
Warning! If not avoided, the following could result in death or serious injury.
• This product must be installed within a restricted access location not accessible by the general public.