FHD554-XZ-H and FHD554-XZ-HR LCD Panels User Guide
020-001725-01 Rev. 1 (11-2019)
Copyright © 2019 Christie Digital Systems USA, Inc. All rights reserved.
18
Installing a display panel
Learn how to install and configure the display panel and the remote control.
Christie recommends that the ambient temperature around a display panel or a video wall remain constant
and below 40 degrees Celsius (104 degrees Fahrenheit). Ensure the display panel or video wall is kept
away from heating and air conditioning vents.
If you are mounting a display panel in an enclosure, ensure sufficient space is left on all sides between it and
surrounding objects. Doing so allows heat to disperse, and helps to maintain the proper operating
temperature. If you are mounting a display panel close to a wall, or are using an OPS module, active cooling
may be required to remove heat and maintain an ideal ambient temperature.
For thin installations or to mount the display close to a wall, remove the handles after hanging the display
on the extending wall mount by turning the handles counter-clockwise.
Inserting batteries in the remote control
Learn how to install batteries in the remote control.
Before you insert batteries in the remote control, consider the following:
•
Ensure that the battery polarities are correct.
•
Do not mix an old battery with a new one or mix different types of batteries together.
•
Do not expose batteries to excessive heat such as sunlight or fire.
If you will not use the remote control for a long time, consider removing the batteries to avoid damage from
battery leakage.
1.
On the back of the remote control, press down on the tab on the cover and pull the cover up.
2.
Insert the batteries. Ensure that the polarities correctly match the
+
and
-
markings inside the
battery compartment.
3.
Insert the lower tab of the cover into the opening, and press down on the cover until it clicks in place.
Operating the remote control
To install batteries in the remote control:
•
Verify that nothing is obstructing the infrared beam between the remote control and the IR receiver on
the display panel.
•
If the effective range of the remote control decreases, or it stops working entirely, replace the existing
batteries with new ones.
•
If necessary, use an IR extender to move the IR receiver to a more convenient place. For more
information, see
Creating an IR extender connection
•
If the infrared remote sensor is exposed to bright sunlight or fluorescent lighting, the remote control
might become unresponsive.
Содержание FHD554-XZ-H
Страница 1: ...User Guide 020 001725 01 FHD554 XZ H and FHD554 XZ HR LCD Panels ...
Страница 58: ......
