manualshive.com logo in svg

Christie FHD462-X, Руководство пользователя

Поделиться
Скачать
Christie FHD462-X Скачать руководство пользователя страница 23

   Installation

FHD462-X LCD Panel User Manual

23

020-000769-02 Rev. 1 (01-2016)

Using an external splitter: As an alternative to daisy-chaining video, or to support larger video 
walls, an external video splitter (not included) can be used. 
For example, to create a video wall incorporating 24 displays using DVI, consider using a 1-to-4 DVI 
splitter and daisy-chaining displays in 4 groups, each group with 6 displays. 
The example below shows a 3x3 matrix (9 displays): 

Connecting RS-232/Ethernet Controller 

Video Wall Setup in Landscape Orientation 
To connect an RS-232 or Ethernet controller to a video wall in landscape orientation, it is 
recommended you connect the controller to the top left or bottom left display in the wall. From 
there connect the remaining displays as shown in the example 3x3 matrices below. 
It is not recommended that more than 10 displays be daisy-chained together using the RS485 input 
and outputs. Above 10 displays, consider breaking the video wall into several groups of 10 displays 
or less, and using separate RS-232 or Ethernet connections to control each group. 

Video Wall Setup in Portrait Orientation 
To connect a RS-232 controller to a video wall in portrait orientation, it is recommended you 
connect the controller to the top left or top right display in the wall. From there connect the 
remaining displays as shown in the example 3x3 matrices below. 

Содержание FHD462-X








































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды