Christie DHD410S, Руководство по обслуживанию

Страница: 10 / 77

Service guidelines
DHD410S Service Manual 10
020-001481-01 Rev. 1 (10-2018)
• Understand and follow all local safety codes and requirements when servicing energized (live)
equipment.
• Perform equipment service in a location free of obstructions and other hazards. For example,
you must have an unobstructed view of the area being serviced.
Wear personal protective equipment (PPE) clothing appropriate to the service you are performing.
This includes, but is not limited to, protective (electrically insulated) footwear, safety glasses, and
gloves rated for the working voltage of the equipment you are servicing.
Safety
Read through this document in its entirety and understand all warnings and precautions before
attempting to operate the projector.
Site requirements
o not use the projector under the following conditions:
• In extremely hot, cold, or humid environments.
• In areas susceptible to excessive dust and dirt.
• Near any product generating a strong magnetic field.
• In direct sunlight.
Warning! Failure to comply with the following could result in death or serious injury.
• Please carefully review and follow the installation instruction included in this manual.
• Do not look into the projector lens when the laser is on. The bright light may result in permanent
eye damage.
• To reduce the risk of fire or electric shock, do not expose this projector to rain or moisture.
• Do not open or disassemble the projector as this may cause electric shock.
• All installations must be performed by Christie qualified authorized trained installers.
• Keep all combustible material away from the concentrated light beam of the projector.
• Position all cables where they cannot contact hot surfaces or be pulled or tripped over.
• Always power down the projector and disconnect all power sources before servicing or cleaning.
• Use a soft cloth moistened with a mild detergent to clean the display housing.
• Disconnect the power plug from the AC outlet if the product is not being used for an extended
period of time.
• Only use the AC power cord supplied. Do not attempt operation if the AC supply and cord are not
within the specified voltage and power range for your region.
• Do not block the ventilation slots and openings on the projector.
• Do not use abrasive cleaners, waxes, or solvents to clean the projector.
• Do not allow anything to rest on the power cord.
• Not for household use.
• No direct exposure to beam shall be permitted.
• While in portrait orientation, use a plate beneath the projector to meet safety requirements.