•
LSM1 for 630-GS and 635-GS:
•
For LSM2, proceed to step 2.
2. Remove the lens through the front of the projector.
Removing the standard boresight adapter plate
As part of the ultra short throw lens installation, remove the standard boresight adapter plate.
Depending on your projector, there are two standard boresight adapter plates:
•
Boresight adapter 1 secured with three screws
•
Boresight adapter 2 secured with four screws
1. For 630-GS and 635-GS only, release the lens ring by turning the lens ring counterclockwise.
2. Remove the screws securing the standard boresight adapter plate.
•
Remove the three screws securing boresight adatper plate 1 (LSM1).
Ultra short throw lens installation
Ultra Short Throw Lens Installation Instruction Sheet
5
020-102569-07 Rev. 1 (12-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
