Adjusting the image settings
HS Series D16-20 User Manual
41
020-001466-01 Rev. 1 (10-2018)
Copyright ©2018 Christie Digital Systems USA Inc. All rights reserved.
6. To edit saturation of the primary color, adjust the slider or enter the color values of the primary
color component you selected until you are satisfied with the colors.
Saturation values reflect the color shifting away from the primary color or toward white.
7. To confirm the selection, press ENTER.
8. To edit gain of the primary, adjust the slider or enter the color values of the primary color
component you selected until you are satisfied with the colors.
Increasing value indicates increasing the lightness, and decreasing the value indicates
decreasing it to black.
9. To confirm your selection, press ENTER.
10. Repeat steps 3 to 9 for each primary color component, except white.
11. To edit the color of white by three components—red, blue and green—adjust the slider or enter
the values until you are satisfied with the white.
12. To confirm your selection, press ENTER.
13. To view a specific color while adjusting, press ENTER to enable Auto Test Pattern.
14. To reset the primary colors to their defaults, select Reset to Default.
15. To reset back to default setting, press ENTER.
Setting the wall color
Set the wall color so the projector can enhance the color performance customized for the specific
wall.
1. Select Menu > Image Settings > Color Matching > Wall Color.
2. Select the preferred setting:
• White
• Gray 130
• Light Yellow
3. Press ENTER.
Adjusting the color value based on gamma
setting
Adjust the color values to give a more detailed displayed image.
1. Select Menu > Image Settings > Advanced Image Settings > Gamma.
2. Select the appropriate option:
• Video
• Film
• Bright
Содержание D16HD-HS
Страница 1: ...HS Series D16WU HS D16HD HS D20WU HS D20HD HS User Manual 020 001466 01...
Страница 72: ......